The Chesterfield is a solid vinyl fence using 7/8" thick x 7" wide vinyl vertical "boards". The term "board" is used loosely here, because they are not boards at all. They are hollow 100% extruded vinyl. These vinyl "boards" are tongue and grooved on the edges so one board fits into the next.

This is the safest and best way to assure a no-gap appearance over the years, when mother nature shifts the ground around and tries to rake the panels. When this happens, the shifting of sections without the tongue and grooved feature would reveal cracks between the verticals. It also, like most other styles, has a steel bottom reinforcing rail that fits inside the vinyl rail. The clay colored fence sections have a steel reinforcement in the top rail also, due to it's special composition. "Classic Curved Deco Rails" on top and bottom add to the attractive appearance while making installation easier. We feel this design is one of the best currently available among vinyl fence  manufacturers for these reasons. Solid fences will catch a lot of wind. With the precautions built into this style and the proper installation of the posts according to the installation manual, this fence will outlast most against the forces of nature. Available in 4', 5' and 6' heights in white and tan. Grey and clay are available in 5' and 6'.
  

   

The Chesterfield with Lattice is a solid vinyl fence using 7/8" thick x 7" wide vinyl vertical "boards". Boards are hollow 100% extruded vinyl. These vinyl "boards" are tongue and grooved on the edges so one board fits into the next.

This is the safest and best way to assure a no-gap appearance over the years, when mother nature shifts the ground around and tries to rake the panels. It also, like most other styles, has a steel bottom reinforcing rail that fits inside the vinyl rail. We feel this design is one of the best currently available among manufacturers of vinyl fence for these reasons. Solid fences will catch a lot of wind. With the precautions built into this style and the proper installation of the posts according to the installation manual, this fence will outlast most against the forces of nature. Actual height includes 1' 4" of lattice panel at top.
    

   

The Chesterfield with Victorian Accent is a solid vinyl fence using 7/8" thick x 7" wide vinyl vertical "boards". Boards are hollow 100% extruded vinyl. These vinyl "boards" are tongue and grooved on the edges so one board fits into the next

This is the safest and best way to assure a no-gap appearance over the years, when mother nature shifts the ground around and tries to rake the panels. It also, like most other styles, has a steel bottom reinforcing rail that fits inside the vinyl rail. We feel this design is one of the best currently available among manufacturers of vinyl fence for these reasons. Solid fences will catch a lot of wind. With the precautions built into this style and the proper installation of the posts according to the installation manual, this fence will outlast most against the forces of nature.
    

   

The Galveston style offers 7" tongue & groove pickets in a section that provides excellent privacy in heights of 7' and 8'. The tongue & groove pickets prevent gaps from showing if the fence section should shift in time. Both the 7' and 8' styles use a middle rail as shown here

Both heights have reinforcement steel rails in all three vinyl rails to keep the section from sagging. "Classic Curve Deco Rails" on top and bottom add to the attractive appearance while making installation easier. These features make the Galveston style one of the sturdiest and best privacy styles available.
    

   

The Lexington is a solid vinyl fence using a unique "V" groove picket. The "boards" are 11-3/8" wide with the appearance of three separate pickets. The Lexington also uses the Classic Curve rail design. This provides a sturdy fence section that is easy to install

The vinyl pickets are tongue and grooved on the edges so one board fits into the next. This is the safest and best way to assure a no-gap appearance over the years. Like most other styles, the Lexington has a steel bottom reinforcing rail that fits inside the vinyl rail. This design is one of the best currently available among vinyl fence manufacturers for these reasons. Available in 6' height white only. Similar appearance to the Chesterfield style but constructed from lighter materials and priced to be a great value. Comes with manufacturer's limited lifetime warranty.
    

   

The Huntington style is a solid vinyl fence using 7/8" thick x 7" wide vinyl vertical "boards". The boards are hollow 100% extruded vinyl. These vinyl "boards" are tongue and grooved on the edges so one board fits into the next.

This is the safest and best way to assure a no-gap appearance over the years. The bottom rail has a steel  reinforcing rail that fits inside the vinyl rail. The top and bottom rails are the new   "Classic Curve Deco Rails" designed to add a more appealing profile and for easier installation. Topped with a "Manchester" style picket accent, this fence is unique and provides privacy with an appealing look. Shown with New England caps but also available with a choice of several other cap styles. The Huntington comes in a 6' height consisting of 4-1/2' of fence and 1-1/2' of accent. It also meets the Boca Pool Code for use around pools. Available in white and tan.
    

   

A vinyl Picket fence gives simple elegance without elegant cost. All of the classic picket sections contain a reinforcement channel in the bottom rail.

This channel will give you peace of mind, knowing that your classic picket panel will never sag. 

The Classic Picket series brings you back to the old red cedar picket fence design – with none of the maintenance that came with these classic wood fences. Designed with the classic look in mind, this series is sure to impress.